<aside> ⚠️ Important Safety Notice: If you plan to use the mount on mobile whiteboards, be careful when rolling them through doorways. In most situations, it's advisable to remove the mount from the whiteboard to prevent any possible harm to the Logitech Scribe, the whiteboard, and the doorway.

</aside>

<aside> 💡 The Mount can be used with both conventional and glass whiteboards that range in thickness from 5mm to 25mm.

</aside>

In the box

Tool needed

• Phillips screwdriver

Install the Scribe Camera Mounting Bracket

Secure the Scribe Camera Mounting Bracket to the mount using the pre-installed screws.

<aside> 💡 The Camera Mounting Bracket is included with your Logitech Scribe.

</aside>

H872_Logitech Scribe_User Guide_Install Mounting Bracket.mp4

Connect the Scribe Camera to its Camera Mounting Bracket

As demonstrated, pass the CAT5e cable through the space between the front and rear surfaces of the mount. Then, connect the CAT5e cable to the Logitech Scribe Camera. Hang and connect the Scribe Camera to its Camera Mounting Bracket.

<aside> 💡 The CAT5e cable is included with your Logitech Scribe.

</aside>

<aside> 💡 Once the plastic tab snaps back and tightly hugs the front of the Scribe Camera base, you can consider the Scribe Camera as fully attached to the Mounting Bracket.

</aside>