In the box

h756 018.jpg

  1. 1 x OnWall mount
  2. 2 x Drywall anchors (F155)
  3. 2 x Drywall anchor screws (F360)
  4. 1 x Set Screw Assembly Key (F914)
  5. 1 x Enclosure Assembly Key (F529)
  6. 1 x Velcro dot set
  7. 1 x Cable Tie (F817)

Mount the pocket to your wall

<aside> 💡 Use the fully assembled OnWall Mount as your hole template.

</aside>

Determine the height of your installation

<aside> ⚠️ To install your iPad to your Drywall at an ADA-compliant height, position the enclosure so that the top edge of the iPad screen is no higher than 48 inches above the finished floor.

</aside>

h756 001.jpg

Review the hole and slot patterns on the pocket

Hold the enclosure to the drywall at the desired installation height

Mark the two screw positions and the CAT cable hole position as shown.

h756 003.jpg